Français
English
Deutsch
español
Italiano
日本語
Eλληνικά
русский
The HW60 at a glance
- From 250 to 500 metres/day*
- Dig in concrete, asphalt or cement-stabilised soils
- Hood designed to prevent stones flying in urban areas
- Finely cut spoils for faster backfill & fewer compaction cycles
- Narrow & clean trench to lay fibre optic cables
*Speed factors: ground conditions, depth and width of the trench.
A Narrow & Clean-Cut Trench to Lay Fibre Optic
The HW60 in Action
Main Features & Components
- Maximum Depth: 0.6m (optionally 0.7m)
- Width: 50, 75, 100, 125 or 200mm
- Digging wheel: Fitted with 58 bullet teeth (19mm shank)
- Weight: Approx. 1300kg (depending on accessories)
Skid steer loader requirements
- Direct and continuous oil flow to the trencher of 110-150 L/min
- Pressure of 220 bar
- Must have the HIGH FLOW option
You will need skid steer loader with the HIGH FLOW option
Why choose the HW60?
Fast & Narrow
Up to 5 times faster than using an excavator with a digging bucket. Do in 1 day what would take 1 week.
Minimal Road Disruption
The HW60 can work in busy city streets without the need to close off road segments.
Hard Ground Resistance
Dig in extra tough conditions: stones, concrete, asphalt, cement, etc.
Clean Trench
Leaves uniform walls and a flat bottom so that the fibre ducts sit correctly.
Rapid Backfilling
The HW60 breaks soil into fine material that backfills easily. Fewer passes needed to close the trench.
Minimal Maintenance
The operator manual gives maintenance advice that any experienced skid steer loader driver can follow.
Ease of Use
If you can operate a skid steer loader, you can operate the HW60.
